This model is designed and rendered in Direct X. The ZIP file also includes the maps and graphics as shown in the images below. #3DModel #dellsweet #directx #Ford
#3DModels #3DCarModels #dellsweet
This is a 1968 Ford truck cab, mated to a custom rear flatbed bed. I like the way the old Fords looked and wished I had the time and money to swap out the frame to a modern 4×4 truck of some kind, modern V8, etc. This model is built in Direct X. It includes all of the maps and graphics as shown. It also comes in 3DS, FBX, OBJ as well as Direct X.
This model is designed and rendered in Direct X. #3DCarModel #directx #dellsweet
This model is a 1970 Dodge Coronet. I never owned one, but I did buy a 4 door version as a family car. That car reminded me of a muscle car even though it had 4 doors. This model is designed and rendered in Direct X. I included renders in Obj, 3DS and FBX as well as Direct X. The ZIP file also includes the maps and graphics as shown in the images below. #3DModels #1970DodgeCoronet #DellSweet #3ds #fbx #obj #DirectX #3DCarModel
This model is designed and rendered in Direct X. The ZIP file also includes the maps and graphics as shown in the images below. #3DModel k #dellsweet #directx #Donk
#3DModels #3DCarModels #dellsweet
This is an AMC Reble. The stock frame is gone and a chevy blazer 4×4 frame has been grafted in. I actually owned a few vehicles like this. Red Neck? Yes, I could have cared less though. This model is built in Direct X. It includes all of the maps and graphics as shown. It also comes in 3DS, FBX, OBJ as well as Direct X.
This model is designed and rendered in Direct X. #3DCarModel #directx #dellsweet
This model is a 1972 AMC Matador. I never owned one, but I did buy an AMC Reble from a guy who needed cash back in the early eighties. That car reminded me of a matador because it had doors from a matador. AMC was trying to stay afloat and so they reused everything that they could, that included doors fitting different models with small modifications. This model is designed and rendered in Direct X. I included renders in Obj, 3DS and FBX as well as Direct X. The ZIP file also includes the maps and graphics as shown in the images below. #3DModels #1972Matador #DellSweet #3ds #fbx #obj #DirectX #3DCarModel
This is a late model Dodge charger with only 2 doors. The model is made with Direct X. It has all of the maps and graphics as shown.
The model comes only as a direct X model. It comes with all of the UV work as shown in the video. It also comes in three setups: Ex commandeered Police Cruiser in Black and White, Yellow off-road, Red off-road and white off-road…
The model comes only as a direct X model: Buy it below…
This is a late model Dodge charger with only 2 doors. The model is made with Direct X. It has all of the maps and graphics as shown.
The model comes only as a direct X model. It comes with all of the UV work as shown in the video. It also comes in three setups: Ex commandeered Police Cruiser in Black and White, Yellow off-road, Red off-road and white off-road…
Building a model start to finish part six This is a complete model build from start to finish and then in a game. The build was done in spare time over 3 days for friend who needed it. it isn’t sped up so that you can see what I am doing… #3dmodels #directx #lopoly #fbx #fbx #3ddesign #DellSweet
This model is designed and rendered in Direct X. The ZIP file also includes the maps and graphics as shown in the images below. #3DModel k #dellsweet #directx #Donk
#3DModels #3DCarModels #dellsweet
There is no such thing as a “Holden Falcon Ute.”
Holden and Ford were fierce rivals in Australia for decades, much like Ford and Chevrolet in the United States. They both produced their own iconic “utes” (utility vehicles), which were essentially a car with a large tray or cargo bed at the back.
Here are the details on the two distinct models:
The Ford Falcon Ute:
Manufactured by Ford Australia from 1961 until local production ceased in 2016.
It was based on the Ford Falcon sedan platform.
The Falcon ute was known for its car-like handling, comfortable ride, and powerful engine options, including the famous Barra inline-six and V8s.
It was a popular choice for both tradespeople and enthusiasts who wanted a vehicle with the practicality of a truck and the performance of a muscle car.
The Holden Ute:
Manufactured by Holden, a subsidiary of General Motors, from 1951 until local production ended in 2017.
The Holden Ute was based on the Holden Commodore sedan platform (and earlier, the Kingswood/Monaro platforms).
It was the direct competitor to the Ford Falcon Ute, and the rivalry between the two was a significant part of Australian car culture.
Like the Falcon, the Holden Ute offered a range of engines, including V6s and V8s, and was also loved for its sporty performance and on-road comfort.
In summary, the Holden and Falcon utes were two different, competing vehicles. While they shared the same basic concept and dominated the Australian “car-based ute” market for many years, they were never combined into a single “Holden Falcon” model. Sources
